推拉篷篷布折叠打包的步骤有哪些?
1、篷布正面向上平展铺开,留出两根边绳,将长度方向的两侧边折向篷布纵向中线。
1. Spread the tarpaulin flat upwards, leaving two edge ropes, and fold the two sides of the length direction towards the longitudinal centerline of the tarpaulin.
2、将已折好的两侧各分三等份,向着中线连折两次。
2. Divide the folded sides into three equal parts and fold them twice towards the center line.

3、将篷布宽度方向的两侧边各向篷布横向中线折,然后再各自连续向中间对折三次而后跳踏实。折叠后的外形尺寸约为1000mmx600mmx300mm。
3. Fold the two sides of the tarpaulin in the width direction towards the horizontal centerline of the tarpaulin, and then fold them continuously towards the middle three times before jumping firmly. The folded dimensions are approximately 1000mmx600mmx300mm.
4、用预留绳打捆,两面捆十字,勒紧捆牢,绳头塞好,不应松动和绳扣脱落,不得拖拉。
4. Use reserved rope to tie, cross tie on both sides, tighten and tie firmly, plug the rope head tightly, do not loosen or the rope buckle should fall off, and do not drag.
5、折叠后应完整清楚地露出篷布上的小路徽及篷布编号。
5. After folding, the small path emblem and tarpaulin number on the tarpaulin should be fully and clearly exposed.
以上的精彩内容来自:济南遮阳棚更多精彩内容请点击我们的网站查看更多:https://www.lantianpengmo.com
The above exciting content comes from: Jinan Sunshade. For more exciting content, please click on our website to view more: https://www.lantianpengmo.com
阅读/ Recommended reading
- 济南雨棚:支架80度和80角是一样的吗 2025-11-22
- 济南推拉蓬的正确移动方法 2025-11-20
- 济南遮阳蓬:阳台遮阳棚选哪种材质好?怎么设计? 2025-11-18
- 济南遮阳棚:膜结构建筑需要保养的几种情况 2025-11-15
膜结构轿车停车棚的高度、宽度等尺寸主要是根据轿车的大小来决定,下面来具体介绍下。 The height, width, and other dimensions of the...

