欢迎您进入山东兰天篷膜安装工程有限公司 在线留言 联系我们

服务咨询热线

15064156568

热门关键词: 移动推拉篷 钢化玻璃和钢结构 固定停车篷

公司新闻

首页>>新闻资讯>>公司新闻济南雨棚的安装方法
联系我们
山东兰天篷膜安装工程有限公司

联系人:张经理

电话:15064156568

网址:https://www.lantianpengmo.com

地址:山东省济南市市中区建设路99-5号一层东户

济南雨棚的安装方法

来源:https://www.lantianpengmo.com/ 日期:2024-05-17 发布人:

  雨棚安装方法

Canopy installation method

  1、螺丝安装法

1. Screw installation method

  雨棚安装可选择螺丝安装法,但注意螺丝的间距,要依板厚做调整,太大或太小都会影响引发应力,如太大,板无法固定住,太小引发应力太紧,从而造成损坏。特别是自攻螺丝,如果固定在PC板上,螺丝间距太大,板材越不会被破损。另外螺丝孔的大小,还要考虑到板材因温差产生的冷缩因素。

Firstly, the installation of the canopy can be done using the screw installation method, but attention should be paid to the spacing of the screws, which should be adjusted according to the thickness of the board. If it is too large or too small, it will affect the stress caused. If it is too large, the board cannot be fixed, and if it is too small, it will cause the stress to be too tight, resulting in damage. Especially for self tapping screws, if fixed on a PC board, if the screw spacing is too large, the board will not be damaged. In addition, the size of the screw holes should also take into account the cold shrinkage factor caused by the temperature difference in the board.

  2、干式装配法

2. Dry assembly method

  其次雨棚安装可选择干式装配法,将密封胶条压紧放入压条内,这样板材膨胀,可自由移动,避免损坏。建议选择EPDM等密封胶,硬度较高,反之如果选择PVC密封胶条,由于生产中有添加增塑剂,板材表面易开裂。

微信图片_20191226114322

Secondly, the installation of the canopy can be done using a dry assembly method, where the sealing strip is tightly pressed and placed inside the strip. This way, the board expands and can move freely to avoid damage. It is recommended to choose sealants such as EPDM, which have higher hardness. Conversely, if PVC sealant strips are chosen, the surface of the board is prone to cracking due to the addition of plasticizers during production.

  3、湿式装配法

3. Wet assembly method

  雨棚在安装时,可选择湿式装配法,主要用于小型场所的使用,如家用车库,温室等区域,湿式装配法,密封系统一定要能承受板材的重量,就算材料膨胀,也不会影响板架之间的粘结力。建议选择中性硅酮胶材料,切勿选择酸碱性的硅酮胶,否则也会导致固化剂开裂。

Finally, when installing the canopy, the wet assembly method can be chosen, mainly used in small areas such as home garages, greenhouses, etc. The wet assembly method requires the sealing system to be able to withstand the weight of the panels, and even if the material expands, it will not affect the bonding force between the panels. It is recommended to choose neutral silicone adhesive materials and avoid acidic or alkaline silicone adhesives, as this can also cause cracking of the curing agent.

以上就是有关:济南雨棚 的介绍,想了解更多的内容请点击:https://www.lantianpengmo.com 我们将会全心全意为您提供满分服务,欢迎您的来电!

The above is an introduction to Jinan Canopy. To learn more, please click: https://www.lantianpengmo.com We will wholeheartedly provide you with full score service. Welcome to call us!

此文关键词:Array  Array  Array  Array  

阅读/ Recommended reading

  什么是济南雨棚膜结构车棚?济南雨棚膜结构车棚有哪些特点?障结构车棚是一种以高强度聚酯纤维或玻瑶钢等材料为基础,经过特殊处理后覆盖在轻型钢架或铝合金构架上的一种新型停车设施,济南...

济南伸缩蓬不能伸缩有什么原因? 2024-05-23
济南遮阳蓬的选择标准有哪些? 2024-05-21
济南雨棚的安装方法 2024-05-17
济南停车棚:停车棚有哪些分类? 2024-05-15

鲁公网安备 37010302000864号