济南停车棚投放使用率越来越高，那么在使用的时候需要注意几点要求，这样才能让停车棚的使用寿命延长。

The use rate of parking sheds in Jinan is getting higher and higher, so we need to pay attention to several requirements when using them, so as to prolong the service life of parking sheds.

做好表面工作，为了保持停车棚的外观亮丽，大家就需要定期的做好相关的清理打扫工作，保持它更加干净整洁

Do a good job of surface work. In order to keep the appearance of the parking shed bright, everyone needs to do a good job of cleaning regularly to keep it clean and tidy

要设计出形态简洁张力自平衡停车棚，清洗要保证不破坏PVDF和PTFE等涂层膜材表面处理层，因此不可以使用擦洗剂、强溶剂、硬刷等，和家用肥皂或餐具清洁剂相比，一般膜材清洗剂通常是相对，也要避免其皮肤、眼睛和黏膜长期接触。

A parking shed with simple shape and tension self balancing shall be designed. The surface treatment layer of PVDF, PTFE and other coating film materials shall not be damaged during cleaning. Therefore, detergent, strong solvent, hard brush, etc. shall not be used. Compared with household soap or tableware cleaner, general film cleaner is usually relatively safe, and long-term contact with skin, eyes and mucous membrane shall be avoided.

济南停车棚如果产生积水或积雪，就要立即积水和积雪，如果雨雪天气持续不断，积水会让膜材破坏，要对公众关闭膜面覆盖的空间，并立即采取措施避免新积水。

If there is water or snow in Jinan parking shed, it is necessary to immediately remove the water and snow. If the rain and snow weather continue, the water will damage the membrane materials. The space covered by the membrane should be closed to the public, and immediate measures should be taken to avoid new water.

为了减少生锈对膜表面的影响，分别选择有锈迹的膜表面，并在生锈的延伸处设置停车棚的固定。在膜的边缘处，考虑到拉力的受力点，并且需要适当地加强张力膜的边缘。

In order to reduce the impact of rust on the film surface, select the film surface with rust, and set the parking shed at the extension of rust. At the edge of the membrane, the stress point of the tension shall be considered, and the edge of the tension membrane shall be properly strengthened.

此外对金属连接件应采用可靠的防腐蚀措施，要考虑节点构造偏心对拉索、膜材产生的影响，施加预张力的方式、结构安装允许偏差，以及进行二次张拉的可能性。

In addition, reliable anti-corrosion measures shall be taken for metal connectors. The influence of node structure eccentricity on cables and membrane materials, the method of applying pretension, allowable deviation of structure installation, and the possibility of secondary tensioning shall be considered.

停车棚在制造的时候，每个步骤以及操作方法都是会引起设备出现故障的因素，对于后期的质量以及使用寿命起到了重要的作用，因此，千万不能盲目操作才可以。更多相关事项就来我们网站https://www.lantianpengmo.com咨询吧！

During the manufacturing of the parking shed, each step and operation method are factors that will cause equipment failures, which play an important role in the later quality and service life. Therefore, blind operation is not allowed. Come to our website for more information https://www.lantianpengmo.com Consult!